Skip Navigation Website Accessibility
Financing Available! Pre Qualify Here // Shop online, pick up in-store //  Next Level 1 Guitar Repair & Design Course Feb 10th! Info & Registration Here

 


CAD Audio Digital Dual-Channel Wireless Microphone System with Headset Mics and Bodypack Transmitters 909.3 - 926.8 MHz

left in stock in

Low in store inventory, may be subject to change

The receiver features volume knobs for each channel and RF indicator lights to show connectivity between the receiver and the transmitters. The back panel includes two balanced XLR output connectors and an unbalanced, mono Mix output on a 1/4" connector. Two antennas with advanced dipole technology help increase the operating distance.
The body packs are equipped with on/off and mute controls and run on two AA batteries for approximately 10 hours. The WXHW head worn microphones feature hypercardioid polar patterns to minimize unwanted feedback when used near speakers. The WXGTR cables enable musicians to configure the GXLD2BB into guitar or bass wireless systems.
Enjoy the easy and exciting performance that the GXLD2™ Wireless Series provides for your next performance.




RXGXLD2 Receiver:
  • Two discrete channels of digital wireless packaged in one receiver chassis
  • Operates in the AI: 909.3 to 926.8 MHz frequency band
  • Digital high-definition audio
  • Advanced dipole antenna technology for increased operating distance
  • Two discrete XLR balanced outputs, one for each channel
  • 1/4" unbalanced mix output
  • High-contrast LCD display
  • RF indicator lights show connectivity between the receiver and the transmitters
  • Advanced dipole antenna technology for increased operating range
TXBGXLD Bodypack Transmitter:
  • On/off and mute switches
  • Battery-life indicator
  • Over 10 hours of battery life with two fresh AA batteries
  • TB4M mic input connector
  • Battery compartment
  • Antenna
WXHW Headworn Microphone:
  • Condenser element
  • Hypercardioid polar pattern
  • TA4F connector
Specifications:
Receiver:
  • Type: Dual-channel wireless receiver
  • Frequency Band: AI: 909.3 to 926.8 MHz
  • Output Level: +10 dBv, maximum
  • Frequency Response: 20 Hz to 20 kHz
  • Antennas: 2 x antennas with dipole antenna technology
  • Output Connectors: 2 x XLR, male, balanced, 1 x 1/4" / 6.3 mm, female, unbalanced (mono mix)
  • Controls: 2 x volume control knobs
  • Indicators: 2 x RF indicator lights
  • Display: LCD display
Bodypack Transmitter:
  • Connector: TB4M
  • Frequency Response: 20 Hz to 20 kHz
  • Input Level: Microphone Input: 1.5 Vrms (5 Vpp), maximum, Instrument Input: 1.5 Vrms (5 Vpp), maximum
  • RF Output: 10 mW
  • Modulation: High-definition digital QPSK
  • Switches: Power on/off switch, Mute on/off switch
  • Indicators: LED indicator light
  • Power Requirements: 2 x AA alkaline or rechargeable batteries
  • Battery Life: >10 hours (alkaline)
Microphone:
  • Type: Headworn, condenser mic
  • Polar Pattern: Hypercardioid
  • Connector: TA4F
Cables:
  • Connector 1: 1/4" / 6.3 mm TS jack, male
  • Connector 2: TA4F

HOURS

Monday Closed
Tuesday 11:00am to 6:00pm
Wednesday 11:00am to 6:00pm
Thursday 11:00am to 6:00pm
Friday 12:00pm to 5:00pm
Saturday 10:00am to 5:00pm
Sunday 10:00am to 4:00pm

CONTACT